3D Models

Beetle • Micro

A small beetle scanned in meticulous detail with Artec Micro serves as an example of what photo texturing can do for your 3D model (hint: brilliant color and texture quality).

Clamp • Micro

For a significant scanning challenge, it was time to get up close, for a highly-detailed model of this industrial clamp.

Copper key • Micro

A copper key scanned with Artec Micro. The key had to be sprayed due to its reflective surface.

Drain Weasel wand connector • Micro

Easily captured with the desktop high-resolution 3D scanner Artec Micro, this tiny plastic wand connector section of a Drain Weasel would be a challenge for many other 3D scanners.

Electrical outlet • Micro

Plastic can reflect light directed at it. That’s simple yet very useful info for someone who wants to have an electrical outlet 3D scanned.

Gemstone • Micro

It took only two scans of five minutes each to render the crystalline shape of the object, captured here in precious detail and high resolution.

Heart pendant • Micro

This beautiful copper heart-shaped pendant was scanned with the fully automatic desktop scanner Artec Micro in just 5 minutes.

iPhone 4S SIM card tray • Micro

Scanning such an extremely small, extremely thin object is impossible for many scanners. But with one click, in just ten minutes, Artec Micro was able to deliver impressive accuracy and high quality.

Jaguar ring • Micro

Covered in tiny knobs, pockmarked dots on the hollowed-out, hard-to-reach insides, and we’re not even talking about the tiny dimensions. This jaguar ring is a challenging obstacle course for any 3D scanner, and served as a good test to demonstrate Artec Micro’s capabilities.

Metal nut • Micro

A metal nut, just over 15 mm, easily scanned with Artec Micro in just two scans. Unlike handheld scanners, Micro was able to scan this piece without the need for any additional features or background.

Pipe bend • Micro

A pipe bend, scanned with Artec Micro. It took only two scans using the simple trajectory to get the full shape of the pipe.

Plaster cast of teeth • Micro

This object is considered as «large» for trajectory purposes. Although we used only a «simple» type of trajectory, with fewer frames, all of the intricate curvatures were successfully captured.

Plastic bolt • Micro

Despite its complex geometry and reflective surface, this 1.5 cm plastic bolt was captured using the ultra-precise Artec Micro in just three scans.

Screw • Micro

Small object — big challenge. How do you capture the thread of this 10 mm long screw using a 3D scanner?

Shampoo bottle cap • Micro

The cap was made of semi-transparent plastic and required a bit of dusting with an airbrush. Then it was mounted on the scanner’s rotating platform with a clamp. A couple of mouse clicks — and scanning commenced.

Socket cap screw • Micro

This model of a tiny screw was captured with Artec Micro in just 6 minutes.

Squirrel skull • Micro

This diminutive skull's 55mm length, 26mm height, and 34mm width, together with its ample degree of geometric complexity, made it a fine choice for scanning with Micro.

Micro 3D models